## nm-dbus-interface

nm-dbus-interface

## Types and Values

#define | NM_AVAILABLE_IN_1_2
#define | NM_AVAILABLE_IN_1_8
#define | NM_DBUS_SERVICE
#define | NM_DBUS_INTERFACE
#define | NM_DBUS_INTERFACE_ACCESS_POINT
#define | NM_DBUS_INTERFACE_ACTIVE_CONNECTION
#define | NM_DBUS_INTERFACE_CHECKPOINT
#define | NM_DBUS_INTERFACE_DEVICE
#define | NM_DBUS_INTERFACE_DEVICE_6LOWPAN
#define | NM_DBUS_INTERFACE_DEVICE_ADSL
#define | NM_DBUS_INTERFACE_DEVICE_BLUETOOTH
#define | NM_DBUS_INTERFACE_DEVICE_BOND
#define | NM_DBUS_INTERFACE_DEVICE_BRIDGE
#define | NM_DBUS_INTERFACE_DEVICE_DUMMY
#define | NM_DBUS_INTERFACE_DEVICE_GENERIC
#define | NM_DBUS_INTERFACE_DEVICE_GRE
#define | NM_DBUS_INTERFACE_DEVICE_HSR
#define | NM_DBUS_INTERFACE_DEVICE_INFINIBAND
#define | NM_DBUS_INTERFACE_DEVICE_IP_TUNNEL
#define | NM_DBUS_INTERFACE_DEVICE_LOOPBACK
#define | NM_DBUS_INTERFACE_DEVICE_MACSEC
#define | NM_DBUS_INTERFACE_DEVICE_MACVLAN
#define | NM_DBUS_INTERFACE_DEVICE_MODEM
#define | NM_DBUS_INTERFACE_DEVICE_OLPC_MESH
#define | NM_DBUS_INTERFACE_DEVICE_OVS_BRIDGE
#define | NM_DBUS_INTERFACE_DEVICE_OVS_INTERFACE
#define | NM_DBUS_INTERFACE_DEVICE_OVS_PORT
#define | NM_DBUS_INTERFACE_DEVICE_PPP
#define | NM_DBUS_INTERFACE_DEVICE_STATISTICS
#define | NM_DBUS_INTERFACE_DEVICE_TEAM
#define | NM_DBUS_INTERFACE_DEVICE_TUN
#define | NM_DBUS_INTERFACE_DEVICE_VETH
#define | NM_DBUS_INTERFACE_DEVICE_VLAN
#define | NM_DBUS_INTERFACE_DEVICE_VRF
#define | NM_DBUS_INTERFACE_DEVICE_VXLAN
#define | NM_DBUS_INTERFACE_DEVICE_WIFI_P2P
#define | NM_DBUS_INTERFACE_DEVICE_WIMAX
#define | NM_DBUS_INTERFACE_DEVICE_WIRED
#define | NM_DBUS_INTERFACE_DEVICE_WIREGUARD
#define | NM_DBUS_INTERFACE_DEVICE_WIRELESS
#define | NM_DBUS_INTERFACE_DEVICE_WPAN
#define | NM_DBUS_INTERFACE_DHCP4_CONFIG
#define | NM_DBUS_INTERFACE_DHCP6_CONFIG
#define | NM_DBUS_INTERFACE_IP4_CONFIG
#define | NM_DBUS_INTERFACE_IP6_CONFIG
#define | NM_DBUS_INTERFACE_WIFI_P2P_PEER
#define | NM_DBUS_INTERFACE_WIMAX_NSP
#define | NM_DBUS_PATH
#define | NM_DBUS_PATH_ACCESS_POINT
#define | NM_DBUS_PATH_WIFI_P2P_PEER
#define | NM_DBUS_PATH_WIMAX_NSP
#define | NM_DBUS_INTERFACE_SETTINGS
#define | NM_DBUS_PATH_SETTINGS
#define | NM_DBUS_INTERFACE_SETTINGS_CONNECTION
#define | NM_DBUS_PATH_SETTINGS_CONNECTION
#define | NM_DBUS_INTERFACE_SETTINGS_CONNECTION_SECRETS
#define | NM_DBUS_INTERFACE_AGENT_MANAGER
#define | NM_DBUS_PATH_AGENT_MANAGER
#define | NM_DBUS_INTERFACE_SECRET_AGENT
#define | NM_DBUS_PATH_SECRET_AGENT
#define | NM_DBUS_INTERFACE_DNS_MANAGER
#define | NM_DBUS_PATH_DNS_MANAGER
enum | NMVersionInfoCapability
enum | NMCapability
enum | NMState
enum | NMConnectivityState
enum | NMDeviceType
enum | NMDeviceCapabilities
enum | NMDeviceWifiCapabilities
enum | NM80211ApFlags
enum | NM80211ApSecurityFlags
enum | NM80211Mode
enum | NMBluetoothCapabilities
enum | NMDeviceModemCapabilities
enum | NMWimaxNspNetworkType
enum | NMDeviceState
enum | NMDeviceStateReason
enum | NMMetered
enum | NMConnectionMultiConnect
enum | NMActiveConnectionState
enum | NMActiveConnectionStateReason
enum | NMSecretAgentGetSecretsFlags
enum | NMSecretAgentCapabilities
#define | NM_LLDP_ATTR_RAW
#define | NM_LLDP_ATTR_DESTINATION
#define | NM_LLDP_ATTR_CHASSIS_ID_TYPE
#define | NM_LLDP_ATTR_CHASSIS_ID
#define | NM_LLDP_ATTR_PORT_ID_TYPE
#define | NM_LLDP_ATTR_PORT_ID
#define | NM_LLDP_ATTR_PORT_DESCRIPTION
#define | NM_LLDP_ATTR_SYSTEM_NAME
#define | NM_LLDP_ATTR_SYSTEM_DESCRIPTION
#define | NM_LLDP_ATTR_SYSTEM_CAPABILITIES
#define | NM_LLDP_ATTR_MANAGEMENT_ADDRESSES
#define | NM_LLDP_ATTR_IEEE_802_1_PVID
#define | NM_LLDP_ATTR_IEEE_802_1_VLANS
#define | NM_LLDP_ATTR_IEEE_802_1_PPVIDS
#define | NM_LLDP_ATTR_IEEE_802_3_MAC_PHY_CONF
#define | NM_LLDP_ATTR_IEEE_802_3_POWER_VIA_MDI
#define | NM_LLDP_ATTR_IEEE_802_3_MAX_FRAME_SIZE
#define | NM_LLDP_ATTR_MUD_URL
#define | NM_LLDP_ATTR_IEEE_802_1_VID
#define | NM_LLDP_ATTR_IEEE_802_1_VLAN_NAME
#define | NM_LLDP_ATTR_IEEE_802_1_PPVID
#define | NM_LLDP_ATTR_IEEE_802_1_PPVID_FLAGS
#define | NM_LLDP_DEST_NEAREST_BRIDGE
#define | NM_LLDP_DEST_NEAREST_NON_TPMR_BRIDGE
#define | NM_LLDP_DEST_NEAREST_CUSTOMER_BRIDGE
enum | NMIPTunnelMode
enum | NMCheckpointCreateFlags
enum | NMRollbackResult
enum | NMSettingsConnectionFlags
enum | NMActivationStateFlags
enum | NMSettingsAddConnection2Flags
enum | NMSettingsUpdate2Flags
enum | NMDeviceReapplyFlags
enum | NMTernary
enum | NMManagerReloadFlags
enum | NMDeviceInterfaceFlags
enum | NMClientPermission
enum | NMClientPermissionResult
enum | NMRadioFlags
enum | NMMptcpFlags
#define | NM_SECRET_TAG_VPN_MSG
#define | NM_SECRET_TAG_DYNAMIC_CHALLENGE
#define | NM_SECRET_TAG_DYNAMIC_CHALLENGE_ECHO

## Object Hierarchy

        GEnum
        ├── NM80211Mode
        ├── NMActiveConnectionState
        ├── NMActiveConnectionStateReason
        ├── NMCapability
        ├── NMClientPermission
        ├── NMClientPermissionResult
        ├── NMConnectionMultiConnect
        ├── NMConnectivityState
        ├── NMDeviceState
        ├── NMDeviceStateReason
        ├── NMDeviceType
        ├── NMIPTunnelMode
        ├── NMMetered
        ├── NMState
        ├── NMTernary
        ├── NMVersionInfoCapability
        ╰── NMWimaxNspNetworkType
        GFlags
        ├── NM80211ApFlags
        ├── NM80211ApSecurityFlags
        ├── NMActivationStateFlags
        ├── NMBluetoothCapabilities
        ├── NMCheckpointCreateFlags
        ├── NMDeviceCapabilities
        ├── NMDeviceInterfaceFlags
        ├── NMDeviceModemCapabilities
        ├── NMDeviceReapplyFlags
        ├── NMDeviceWifiCapabilities
        ├── NMManagerReloadFlags
        ├── NMMptcpFlags
        ├── NMRadioFlags
        ├── NMSecretAgentCapabilities
        ├── NMSecretAgentGetSecretsFlags
        ├── NMSettingsAddConnection2Flags
        ├── NMSettingsConnectionFlags
        ╰── NMSettingsUpdate2Flags

## Description

## Functions

## Types and Values

### NM_AVAILABLE_IN_1_2

    #define             NM_AVAILABLE_IN_1_2

### NM_AVAILABLE_IN_1_8

    #define             NM_AVAILABLE_IN_1_8

### NM_DBUS_SERVICE

    #define NM_DBUS_SERVICE "org.freedesktop.NetworkManager"

### NM_DBUS_INTERFACE

    #define NM_DBUS_INTERFACE                      "org.freedesktop.NetworkManager"

### NM_DBUS_INTERFACE_ACCESS_POINT

    #define NM_DBUS_INTERFACE_ACCESS_POINT         NM_DBUS_INTERFACE ".AccessPoint"

### NM_DBUS_INTERFACE_ACTIVE_CONNECTION

    #define NM_DBUS_INTERFACE_ACTIVE_CONNECTION    NM_DBUS_INTERFACE ".Connection.Active"

### NM_DBUS_INTERFACE_CHECKPOINT

    #define NM_DBUS_INTERFACE_CHECKPOINT           NM_DBUS_INTERFACE ".Checkpoint"

### NM_DBUS_INTERFACE_DEVICE

    #define NM_DBUS_INTERFACE_DEVICE               NM_DBUS_INTERFACE ".Device"

### NM_DBUS_INTERFACE_DEVICE_6LOWPAN

    #define NM_DBUS_INTERFACE_DEVICE_6LOWPAN       NM_DBUS_INTERFACE_DEVICE ".Lowpan"

### NM_DBUS_INTERFACE_DEVICE_ADSL

    #define NM_DBUS_INTERFACE_DEVICE_ADSL          NM_DBUS_INTERFACE_DEVICE ".Adsl"

### NM_DBUS_INTERFACE_DEVICE_BLUETOOTH

    #define NM_DBUS_INTERFACE_DEVICE_BLUETOOTH     NM_DBUS_INTERFACE_DEVICE ".Bluetooth"

### NM_DBUS_INTERFACE_DEVICE_BOND

    #define NM_DBUS_INTERFACE_DEVICE_BOND          NM_DBUS_INTERFACE_DEVICE ".Bond"

### NM_DBUS_INTERFACE_DEVICE_BRIDGE

    #define NM_DBUS_INTERFACE_DEVICE_BRIDGE        NM_DBUS_INTERFACE_DEVICE ".Bridge"

### NM_DBUS_INTERFACE_DEVICE_DUMMY

    #define NM_DBUS_INTERFACE_DEVICE_DUMMY         NM_DBUS_INTERFACE_DEVICE ".Dummy"

### NM_DBUS_INTERFACE_DEVICE_GENERIC

    #define NM_DBUS_INTERFACE_DEVICE_GENERIC       NM_DBUS_INTERFACE_DEVICE ".Generic"

### NM_DBUS_INTERFACE_DEVICE_GRE

    #define NM_DBUS_INTERFACE_DEVICE_GRE           NM_DBUS_INTERFACE_DEVICE ".Gre"

### NM_DBUS_INTERFACE_DEVICE_HSR

    #define NM_DBUS_INTERFACE_DEVICE_HSR           NM_DBUS_INTERFACE_DEVICE ".Hsr"

### NM_DBUS_INTERFACE_DEVICE_INFINIBAND

    #define NM_DBUS_INTERFACE_DEVICE_INFINIBAND    NM_DBUS_INTERFACE_DEVICE ".Infiniband"

### NM_DBUS_INTERFACE_DEVICE_IP_TUNNEL

    #define NM_DBUS_INTERFACE_DEVICE_IP_TUNNEL     NM_DBUS_INTERFACE_DEVICE ".IPTunnel"

### NM_DBUS_INTERFACE_DEVICE_LOOPBACK

    #define NM_DBUS_INTERFACE_DEVICE_LOOPBACK      NM_DBUS_INTERFACE_DEVICE ".Loopback"

### NM_DBUS_INTERFACE_DEVICE_MACSEC

    #define NM_DBUS_INTERFACE_DEVICE_MACSEC        NM_DBUS_INTERFACE_DEVICE ".Macsec"

### NM_DBUS_INTERFACE_DEVICE_MACVLAN

    #define NM_DBUS_INTERFACE_DEVICE_MACVLAN       NM_DBUS_INTERFACE_DEVICE ".Macvlan"

### NM_DBUS_INTERFACE_DEVICE_MODEM

    #define NM_DBUS_INTERFACE_DEVICE_MODEM         NM_DBUS_INTERFACE_DEVICE ".Modem"

### NM_DBUS_INTERFACE_DEVICE_OLPC_MESH

    #define NM_DBUS_INTERFACE_DEVICE_OLPC_MESH     NM_DBUS_INTERFACE_DEVICE ".OlpcMesh"

### NM_DBUS_INTERFACE_DEVICE_OVS_BRIDGE

    #define NM_DBUS_INTERFACE_DEVICE_OVS_BRIDGE    NM_DBUS_INTERFACE_DEVICE ".OvsBridge"

### NM_DBUS_INTERFACE_DEVICE_OVS_INTERFACE

    #define NM_DBUS_INTERFACE_DEVICE_OVS_INTERFACE NM_DBUS_INTERFACE_DEVICE ".OvsInterface"

### NM_DBUS_INTERFACE_DEVICE_OVS_PORT

    #define NM_DBUS_INTERFACE_DEVICE_OVS_PORT      NM_DBUS_INTERFACE_DEVICE ".OvsPort"

### NM_DBUS_INTERFACE_DEVICE_PPP

    #define NM_DBUS_INTERFACE_DEVICE_PPP           NM_DBUS_INTERFACE_DEVICE ".Ppp"

### NM_DBUS_INTERFACE_DEVICE_STATISTICS

    #define NM_DBUS_INTERFACE_DEVICE_STATISTICS    NM_DBUS_INTERFACE_DEVICE ".Statistics"

### NM_DBUS_INTERFACE_DEVICE_TEAM

    #define NM_DBUS_INTERFACE_DEVICE_TEAM          NM_DBUS_INTERFACE_DEVICE ".Team"

### NM_DBUS_INTERFACE_DEVICE_TUN

    #define NM_DBUS_INTERFACE_DEVICE_TUN           NM_DBUS_INTERFACE_DEVICE ".Tun"

### NM_DBUS_INTERFACE_DEVICE_VETH

    #define NM_DBUS_INTERFACE_DEVICE_VETH          NM_DBUS_INTERFACE_DEVICE ".Veth"

### NM_DBUS_INTERFACE_DEVICE_VLAN

    #define NM_DBUS_INTERFACE_DEVICE_VLAN          NM_DBUS_INTERFACE_DEVICE ".Vlan"

### NM_DBUS_INTERFACE_DEVICE_VRF

    #define NM_DBUS_INTERFACE_DEVICE_VRF           NM_DBUS_INTERFACE_DEVICE ".Vrf"

### NM_DBUS_INTERFACE_DEVICE_VXLAN

    #define NM_DBUS_INTERFACE_DEVICE_VXLAN         NM_DBUS_INTERFACE_DEVICE ".Vxlan"

### NM_DBUS_INTERFACE_DEVICE_WIFI_P2P

    #define NM_DBUS_INTERFACE_DEVICE_WIFI_P2P      NM_DBUS_INTERFACE_DEVICE ".WifiP2P"

### NM_DBUS_INTERFACE_DEVICE_WIMAX

    #define NM_DBUS_INTERFACE_DEVICE_WIMAX         NM_DBUS_INTERFACE_DEVICE ".WiMax"

### NM_DBUS_INTERFACE_DEVICE_WIRED

    #define NM_DBUS_INTERFACE_DEVICE_WIRED         NM_DBUS_INTERFACE_DEVICE ".Wired"

### NM_DBUS_INTERFACE_DEVICE_WIREGUARD

    #define NM_DBUS_INTERFACE_DEVICE_WIREGUARD     NM_DBUS_INTERFACE_DEVICE ".WireGuard"

### NM_DBUS_INTERFACE_DEVICE_WIRELESS

    #define NM_DBUS_INTERFACE_DEVICE_WIRELESS      NM_DBUS_INTERFACE_DEVICE ".Wireless"

### NM_DBUS_INTERFACE_DEVICE_WPAN

    #define NM_DBUS_INTERFACE_DEVICE_WPAN          NM_DBUS_INTERFACE_DEVICE ".Wpan"

### NM_DBUS_INTERFACE_DHCP4_CONFIG

    #define NM_DBUS_INTERFACE_DHCP4_CONFIG         NM_DBUS_INTERFACE ".DHCP4Config"

### NM_DBUS_INTERFACE_DHCP6_CONFIG

    #define NM_DBUS_INTERFACE_DHCP6_CONFIG         NM_DBUS_INTERFACE ".DHCP6Config"

### NM_DBUS_INTERFACE_IP4_CONFIG

    #define NM_DBUS_INTERFACE_IP4_CONFIG           NM_DBUS_INTERFACE ".IP4Config"

### NM_DBUS_INTERFACE_IP6_CONFIG

    #define NM_DBUS_INTERFACE_IP6_CONFIG           NM_DBUS_INTERFACE ".IP6Config"

### NM_DBUS_INTERFACE_WIFI_P2P_PEER

    #define NM_DBUS_INTERFACE_WIFI_P2P_PEER        NM_DBUS_INTERFACE ".WifiP2PPeer"

### NM_DBUS_INTERFACE_WIMAX_NSP

    #define NM_DBUS_INTERFACE_WIMAX_NSP            NM_DBUS_INTERFACE ".WiMax.Nsp"

### NM_DBUS_PATH

    #define NM_DBUS_PATH               "/org/freedesktop/NetworkManager"

### NM_DBUS_PATH_ACCESS_POINT

    #define NM_DBUS_PATH_ACCESS_POINT  NM_DBUS_PATH "/AccessPoint"

### NM_DBUS_PATH_WIFI_P2P_PEER

    #define NM_DBUS_PATH_WIFI_P2P_PEER NM_DBUS_PATH "/WifiP2PPeer"

### NM_DBUS_PATH_WIMAX_NSP

    #define NM_DBUS_PATH_WIMAX_NSP     NM_DBUS_PATH "/Nsp"

### NM_DBUS_INTERFACE_SETTINGS

    #define NM_DBUS_INTERFACE_SETTINGS "org.freedesktop.NetworkManager.Settings"

### NM_DBUS_PATH_SETTINGS

    #define NM_DBUS_PATH_SETTINGS      "/org/freedesktop/NetworkManager/Settings"

### NM_DBUS_INTERFACE_SETTINGS_CONNECTION

    #define NM_DBUS_INTERFACE_SETTINGS_CONNECTION "org.freedesktop.NetworkManager.Settings.Connection"

### NM_DBUS_PATH_SETTINGS_CONNECTION

    #define NM_DBUS_PATH_SETTINGS_CONNECTION      "/org/freedesktop/NetworkManager/Settings/Connection"

### NM_DBUS_INTERFACE_SETTINGS_CONNECTION_SECRETS

    #define             NM_DBUS_INTERFACE_SETTINGS_CONNECTION_SECRETS

### NM_DBUS_INTERFACE_AGENT_MANAGER

    #define NM_DBUS_INTERFACE_AGENT_MANAGER NM_DBUS_INTERFACE ".AgentManager"

### NM_DBUS_PATH_AGENT_MANAGER

    #define NM_DBUS_PATH_AGENT_MANAGER      "/org/freedesktop/NetworkManager/AgentManager"

### NM_DBUS_INTERFACE_SECRET_AGENT

    #define NM_DBUS_INTERFACE_SECRET_AGENT NM_DBUS_INTERFACE ".SecretAgent"

### NM_DBUS_PATH_SECRET_AGENT

    #define NM_DBUS_PATH_SECRET_AGENT      "/org/freedesktop/NetworkManager/SecretAgent"

### NM_DBUS_INTERFACE_DNS_MANAGER

    #define NM_DBUS_INTERFACE_DNS_MANAGER "org.freedesktop.NetworkManager.DnsManager"

### NM_DBUS_PATH_DNS_MANAGER

    #define NM_DBUS_PATH_DNS_MANAGER      "/org/freedesktop/NetworkManager/DnsManager"

### enum NMVersionInfoCapability

Currently no enum values are defined. These capabilities are exposed on D-Bus in the "VersionInfo" bit field.

#### Members

_NM_VERSION_INFO_CAPABILITY_UNUSED |  |

Since: 1.42

### enum NMCapability

NMCapability names the numbers in the Capabilities property. Capabilities are positive numbers. They are part of stable API and a certain capability number is guaranteed not to change.

The range 0x7000 - 0x7FFF of capabilities is guaranteed not to be used by upstream NetworkManager. It could thus be used for downstream extensions.

#### Members

NM_CAPABILITY_TEAM | Teams can be managed. This means the team device plugin is loaded. |
NM_CAPABILITY_OVS | OpenVSwitch can be managed. This means the OVS device plugin is loaded. Since: 1.24. |

Since: 1.6

### enum NMState

NMState values indicate the current overall networking state.

#### Members

NM_STATE_UNKNOWN

Networking state is unknown. This indicates a daemon error that makes it unable to reasonably assess the state. In such event the applications are expected to assume Internet connectivity might be present and not disable controls that require network access. The graphical shells may hide the network accessibility indicator altogether since no meaningful status indication can be provided.

NM_STATE_ASLEEP | Networking is not enabled, the system is being suspended or resumed from suspend. |
NM_STATE_DISCONNECTED | There is no active network connection. The graphical shell should indicate no network connectivity and the applications should not attempt to access the network. |
NM_STATE_DISCONNECTING | Network connections are being cleaned up. The applications should tear down their network sessions. |
NM_STATE_CONNECTING | A network connection is being started The graphical shell should indicate the network is being connected while the applications should still make no attempts to connect the network. |
NM_STATE_CONNECTED_LOCAL | There is only local IPv4 and/or IPv6 connectivity, but no default route to access the Internet. The graphical shell should indicate no network connectivity. |
NM_STATE_CONNECTED_SITE | There is only site-wide IPv4 and/or IPv6 connectivity. This means a default route is available, but the Internet connectivity check (see "Connectivity" property) did not succeed. The graphical shell should indicate limited network connectivity. |
NM_STATE_CONNECTED_GLOBAL | There is global IPv4 and/or IPv6 Internet connectivity This means the Internet connectivity check succeeded, the graphical shell should indicate full network connectivity. |

### enum NMConnectivityState

#### Members

NM_CONNECTIVITY_UNKNOWN | Network connectivity is unknown. This means the connectivity checks are disabled (e.g. on server installations) or has not run yet. The graphical shell should assume the Internet connection might be available and not present a captive portal window. |
NM_CONNECTIVITY_NONE | The host is not connected to any network. There's no active connection that contains a default route to the internet and thus it makes no sense to even attempt a connectivity check. The graphical shell should use this state to indicate the network connection is unavailable. |

NM_CONNECTIVITY_PORTAL

The Internet connection is hijacked by a captive portal gateway. The graphical shell may open a sandboxed web browser window (because the captive portals typically attempt a man-in-the-middle attacks against the https connections) for the purpose of authenticating to a gateway and retrigger the connectivity check with `CheckConnectivity()` when the browser window is dismissed.

NM_CONNECTIVITY_LIMITED | The host is connected to a network, does not appear to be able to reach the full Internet, but a captive portal has not been detected. |
NM_CONNECTIVITY_FULL | The host is connected to a network, and appears to be able to reach the full Internet. |

### enum NMDeviceType

NMDeviceType values indicate the type of hardware represented by a device object.

#### Members

NM_DEVICE_TYPE_UNKNOWN | unknown device |
NM_DEVICE_TYPE_ETHERNET | a wired ethernet device |
NM_DEVICE_TYPE_WIFI | an 802.11 Wi-Fi device |
NM_DEVICE_TYPE_UNUSED1 | not used |
NM_DEVICE_TYPE_UNUSED2 | not used |
NM_DEVICE_TYPE_BT | a Bluetooth device supporting PAN or DUN access protocols |
NM_DEVICE_TYPE_OLPC_MESH | an OLPC XO mesh networking device |
NM_DEVICE_TYPE_WIMAX | an 802.16e Mobile WiMAX broadband device |
NM_DEVICE_TYPE_MODEM | a modem supporting analog telephone, CDMA/EVDO, GSM/UMTS, or LTE network access protocols |
NM_DEVICE_TYPE_INFINIBAND | an IP-over-InfiniBand device |
NM_DEVICE_TYPE_BOND | a bond master interface |
NM_DEVICE_TYPE_VLAN | an 802.1Q VLAN interface |
NM_DEVICE_TYPE_ADSL | ADSL modem |
NM_DEVICE_TYPE_BRIDGE | a bridge master interface |
NM_DEVICE_TYPE_GENERIC | generic support for unrecognized device types |
NM_DEVICE_TYPE_TEAM | a team master interface |
NM_DEVICE_TYPE_TUN | a TUN or TAP interface |
NM_DEVICE_TYPE_IP_TUNNEL | a IP tunnel interface |
NM_DEVICE_TYPE_MACVLAN | a MACVLAN interface |
NM_DEVICE_TYPE_VXLAN | a VXLAN interface |
NM_DEVICE_TYPE_VETH | a VETH interface |
NM_DEVICE_TYPE_MACSEC | a MACsec interface |
NM_DEVICE_TYPE_DUMMY | a dummy interface |
NM_DEVICE_TYPE_PPP | a PPP interface |
NM_DEVICE_TYPE_OVS_INTERFACE | a Open vSwitch interface |
NM_DEVICE_TYPE_OVS_PORT | a Open vSwitch port |
NM_DEVICE_TYPE_OVS_BRIDGE | a Open vSwitch bridge |
NM_DEVICE_TYPE_WPAN | a IEEE 802.15.4 (WPAN) MAC Layer Device |
NM_DEVICE_TYPE_6LOWPAN | 6LoWPAN interface |
NM_DEVICE_TYPE_WIREGUARD | a WireGuard interface |
NM_DEVICE_TYPE_WIFI_P2P | an 802.11 Wi-Fi P2P device. Since: 1.16. |
NM_DEVICE_TYPE_VRF | A VRF (Virtual Routing and Forwarding) interface. Since: 1.24. |
NM_DEVICE_TYPE_LOOPBACK | a loopback interface. Since: 1.42. |
NM_DEVICE_TYPE_HSR | A HSR/PRP device. Since: 1.46. |

### enum NMDeviceCapabilities

General device capability flags.

#### Members

NM_DEVICE_CAP_NONE | device has no special capabilities |
NM_DEVICE_CAP_NM_SUPPORTED | NetworkManager supports this device |
NM_DEVICE_CAP_CARRIER_DETECT | this device can indicate carrier status |
NM_DEVICE_CAP_IS_SOFTWARE | this device is a software device |
NM_DEVICE_CAP_SRIOV | this device supports single-root I/O virtualization |

### enum NMDeviceWifiCapabilities

802.11 specific device encryption and authentication capabilities.

#### Members

NM_WIFI_DEVICE_CAP_NONE | device has no encryption/authentication capabilities |
NM_WIFI_DEVICE_CAP_CIPHER_WEP40 | device supports 40/64-bit WEP encryption |
NM_WIFI_DEVICE_CAP_CIPHER_WEP104 | device supports 104/128-bit WEP encryption |
NM_WIFI_DEVICE_CAP_CIPHER_TKIP | device supports TKIP encryption |
NM_WIFI_DEVICE_CAP_CIPHER_CCMP | device supports AES/CCMP encryption |
NM_WIFI_DEVICE_CAP_WPA | device supports WPA1 authentication |
NM_WIFI_DEVICE_CAP_RSN | device supports WPA2/RSN authentication |
NM_WIFI_DEVICE_CAP_AP | device supports Access Point mode |
NM_WIFI_DEVICE_CAP_ADHOC | device supports Ad-Hoc mode |
NM_WIFI_DEVICE_CAP_FREQ_VALID | device reports frequency capabilities |
NM_WIFI_DEVICE_CAP_FREQ_2GHZ | device supports 2.4GHz frequencies |
NM_WIFI_DEVICE_CAP_FREQ_5GHZ | device supports 5GHz frequencies |
NM_WIFI_DEVICE_CAP_FREQ_6GHZ | device supports 6GHz frequencies. Since: 1.46. |
NM_WIFI_DEVICE_CAP_MESH | device supports acting as a mesh point. Since: 1.20. |
NM_WIFI_DEVICE_CAP_IBSS_RSN | device supports WPA2/RSN in an IBSS network. Since: 1.22. |

### enum NM80211ApFlags

802.11 access point flags.

#### Members

NM_802_11_AP_FLAGS_NONE | access point has no special capabilities |
NM_802_11_AP_FLAGS_PRIVACY | access point requires authentication and encryption (usually means WEP) |
NM_802_11_AP_FLAGS_WPS | access point supports some WPS method |
NM_802_11_AP_FLAGS_WPS_PBC | access point supports push-button WPS |
NM_802_11_AP_FLAGS_WPS_PIN | access point supports PIN-based WPS |

### enum NM80211ApSecurityFlags

802.11 access point security and authentication flags. These flags describe the current security requirements of an access point as determined from the access point's beacon.

#### Members

NM_802_11_AP_SEC_NONE | the access point has no special security requirements |
NM_802_11_AP_SEC_PAIR_WEP40 | 40/64-bit WEP is supported for pairwise/unicast encryption |
NM_802_11_AP_SEC_PAIR_WEP104 | 104/128-bit WEP is supported for pairwise/unicast encryption |
NM_802_11_AP_SEC_PAIR_TKIP | TKIP is supported for pairwise/unicast encryption |
NM_802_11_AP_SEC_PAIR_CCMP | AES/CCMP is supported for pairwise/unicast encryption |
NM_802_11_AP_SEC_GROUP_WEP40 | 40/64-bit WEP is supported for group/broadcast encryption |
NM_802_11_AP_SEC_GROUP_WEP104 | 104/128-bit WEP is supported for group/broadcast encryption |
NM_802_11_AP_SEC_GROUP_TKIP | TKIP is supported for group/broadcast encryption |
NM_802_11_AP_SEC_GROUP_CCMP | AES/CCMP is supported for group/broadcast encryption |
NM_802_11_AP_SEC_KEY_MGMT_PSK | WPA/RSN Pre-Shared Key encryption is supported |
NM_802_11_AP_SEC_KEY_MGMT_802_1X | 802.1x authentication and key management is supported |
NM_802_11_AP_SEC_KEY_MGMT_SAE | WPA/RSN Simultaneous Authentication of Equals is supported |
NM_802_11_AP_SEC_KEY_MGMT_OWE | WPA/RSN Opportunistic Wireless Encryption is supported |
NM_802_11_AP_SEC_KEY_MGMT_OWE_TM | WPA/RSN Opportunistic Wireless Encryption transition mode is supported. Since: 1.26. |
NM_802_11_AP_SEC_KEY_MGMT_EAP_SUITE_B_192 | WPA3 Enterprise Suite-B 192 bit mode is supported. Since: 1.30. |

### enum NM80211Mode

Indicates the 802.11 mode an access point or device is currently in.

#### Members

NM_802_11_MODE_UNKNOWN | the device or access point mode is unknown |
NM_802_11_MODE_ADHOC | for both devices and access point objects, indicates the object is part of an Ad-Hoc 802.11 network without a central coordinating access point. |
NM_802_11_MODE_INFRA | the device or access point is in infrastructure mode. For devices, this indicates the device is an 802.11 client/station. For access point objects, this indicates the object is an access point that provides connectivity to clients. |
NM_802_11_MODE_AP | the device is an access point/hotspot. Not valid for access point objects; used only for hotspot mode on the local machine. |
NM_802_11_MODE_MESH | the device is a 802.11s mesh point. Since: 1.20. |

### enum NMBluetoothCapabilities

NMBluetoothCapabilities values indicate the usable capabilities of a Bluetooth device.

#### Members

NM_BT_CAPABILITY_NONE | device has no usable capabilities |
NM_BT_CAPABILITY_DUN | device provides Dial-Up Networking capability |
NM_BT_CAPABILITY_NAP | device provides Network Access Point capability |

### enum NMDeviceModemCapabilities

NMDeviceModemCapabilities values indicate the generic radio access technology families a modem device supports. For more information on the specific access technologies the device supports use the ModemManager D-Bus API.

#### Members

NM_DEVICE_MODEM_CAPABILITY_NONE | modem has no usable capabilities |
NM_DEVICE_MODEM_CAPABILITY_POTS | modem uses the analog wired telephone network and is not a wireless/cellular device |
NM_DEVICE_MODEM_CAPABILITY_CDMA_EVDO | modem supports at least one of CDMA 1xRTT, EVDO revision 0, EVDO revision A, or EVDO revision B |
NM_DEVICE_MODEM_CAPABILITY_GSM_UMTS | modem supports at least one of GSM, GPRS, EDGE, UMTS, HSDPA, HSUPA, or HSPA+ packet switched data capability |
NM_DEVICE_MODEM_CAPABILITY_LTE | modem has LTE data capability |
NM_DEVICE_MODEM_CAPABILITY_5GNR | modem has 5GNR data capability. Since: 1.36. |

### enum NMWimaxNspNetworkType

WiMAX network type.

#### Members

NM_WIMAX_NSP_NETWORK_TYPE_UNKNOWN | unknown network type |
NM_WIMAX_NSP_NETWORK_TYPE_HOME | home network |
NM_WIMAX_NSP_NETWORK_TYPE_PARTNER | partner network |
NM_WIMAX_NSP_NETWORK_TYPE_ROAMING_PARTNER | roaming partner network |

### enum NMDeviceState

#### Members

NM_DEVICE_STATE_UNKNOWN | the device's state is unknown |
NM_DEVICE_STATE_UNMANAGED | the device is recognized, but not managed by NetworkManager |
NM_DEVICE_STATE_UNAVAILABLE | the device is managed by NetworkManager, but is not available for use. Reasons may include the wireless switched off, missing firmware, no ethernet carrier, missing supplicant or modem manager, etc. |
NM_DEVICE_STATE_DISCONNECTED | the device can be activated, but is currently idle and not connected to a network. |
NM_DEVICE_STATE_PREPARE | the device is preparing the connection to the network. This may include operations like changing the MAC address, setting physical link properties, and anything else required to connect to the requested network. |
NM_DEVICE_STATE_CONFIG | the device is connecting to the requested network. This may include operations like associating with the Wi-Fi AP, dialing the modem, connecting to the remote Bluetooth device, etc. |
NM_DEVICE_STATE_NEED_AUTH | the device requires more information to continue connecting to the requested network. This includes secrets like WiFi passphrases, login passwords, PIN codes, etc. |
NM_DEVICE_STATE_IP_CONFIG | the device is requesting IPv4 and/or IPv6 addresses and routing information from the network. |
NM_DEVICE_STATE_IP_CHECK | the device is checking whether further action is required for the requested network connection. This may include checking whether only local network access is available, whether a captive portal is blocking access to the Internet, etc. |
NM_DEVICE_STATE_SECONDARIES | the device is waiting for a secondary connection (like a VPN) which must activated before the device can be activated |
NM_DEVICE_STATE_ACTIVATED | the device has a network connection, either local or global. |
NM_DEVICE_STATE_DEACTIVATING | a disconnection from the current network connection was requested, and the device is cleaning up resources used for that connection. The network connection may still be valid. |
NM_DEVICE_STATE_FAILED | the device failed to connect to the requested network and is cleaning up the connection request |

### enum NMDeviceStateReason

Device state change reason codes

#### Members

NM_DEVICE_STATE_REASON_NONE | No reason given |
NM_DEVICE_STATE_REASON_UNKNOWN | Unknown error |
NM_DEVICE_STATE_REASON_NOW_MANAGED | Device is now managed |
NM_DEVICE_STATE_REASON_NOW_UNMANAGED | Device is now unmanaged |
NM_DEVICE_STATE_REASON_CONFIG_FAILED | The device could not be readied for configuration |
NM_DEVICE_STATE_REASON_IP_CONFIG_UNAVAILABLE | IP configuration could not be reserved (no available address, timeout, etc) |
NM_DEVICE_STATE_REASON_IP_CONFIG_EXPIRED | The IP config is no longer valid |
NM_DEVICE_STATE_REASON_NO_SECRETS | Secrets were required, but not provided |
NM_DEVICE_STATE_REASON_SUPPLICANT_DISCONNECT | 802.1x supplicant disconnected |
NM_DEVICE_STATE_REASON_SUPPLICANT_CONFIG_FAILED | 802.1x supplicant configuration failed |
NM_DEVICE_STATE_REASON_SUPPLICANT_FAILED | 802.1x supplicant failed |
NM_DEVICE_STATE_REASON_SUPPLICANT_TIMEOUT | 802.1x supplicant took too long to authenticate |
NM_DEVICE_STATE_REASON_PPP_START_FAILED | PPP service failed to start |
NM_DEVICE_STATE_REASON_PPP_DISCONNECT | PPP service disconnected |
NM_DEVICE_STATE_REASON_PPP_FAILED | PPP failed |
NM_DEVICE_STATE_REASON_DHCP_START_FAILED | DHCP client failed to start |
NM_DEVICE_STATE_REASON_DHCP_ERROR | DHCP client error |
NM_DEVICE_STATE_REASON_DHCP_FAILED | DHCP client failed |
NM_DEVICE_STATE_REASON_SHARED_START_FAILED | Shared connection service failed to start |
NM_DEVICE_STATE_REASON_SHARED_FAILED | Shared connection service failed |
NM_DEVICE_STATE_REASON_AUTOIP_START_FAILED | AutoIP service failed to start |
NM_DEVICE_STATE_REASON_AUTOIP_ERROR | AutoIP service error |
NM_DEVICE_STATE_REASON_AUTOIP_FAILED | AutoIP service failed |
NM_DEVICE_STATE_REASON_MODEM_BUSY | The line is busy |
NM_DEVICE_STATE_REASON_MODEM_NO_DIAL_TONE | No dial tone |
NM_DEVICE_STATE_REASON_MODEM_NO_CARRIER | No carrier could be established |
NM_DEVICE_STATE_REASON_MODEM_DIAL_TIMEOUT | The dialing request timed out |
NM_DEVICE_STATE_REASON_MODEM_DIAL_FAILED | The dialing attempt failed |
NM_DEVICE_STATE_REASON_MODEM_INIT_FAILED | Modem initialization failed |
NM_DEVICE_STATE_REASON_GSM_APN_FAILED | Failed to select the specified APN |
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_NOT_SEARCHING | Not searching for networks |
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_DENIED | Network registration denied |
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_TIMEOUT | Network registration timed out |
NM_DEVICE_STATE_REASON_GSM_REGISTRATION_FAILED | Failed to register with the requested network |
NM_DEVICE_STATE_REASON_GSM_PIN_CHECK_FAILED | PIN check failed |
NM_DEVICE_STATE_REASON_FIRMWARE_MISSING | Necessary firmware for the device may be missing |
NM_DEVICE_STATE_REASON_REMOVED | The device was removed |
NM_DEVICE_STATE_REASON_SLEEPING | NetworkManager went to sleep |
NM_DEVICE_STATE_REASON_CONNECTION_REMOVED | The device's active connection disappeared |
NM_DEVICE_STATE_REASON_USER_REQUESTED | Device disconnected by user or client |
NM_DEVICE_STATE_REASON_CARRIER | Carrier/link changed |
NM_DEVICE_STATE_REASON_CONNECTION_ASSUMED | The device's existing connection was assumed |
NM_DEVICE_STATE_REASON_SUPPLICANT_AVAILABLE | The supplicant is now available |
NM_DEVICE_STATE_REASON_MODEM_NOT_FOUND | The modem could not be found |
NM_DEVICE_STATE_REASON_BT_FAILED | The Bluetooth connection failed or timed out |
NM_DEVICE_STATE_REASON_GSM_SIM_NOT_INSERTED | GSM Modem's SIM Card not inserted |
NM_DEVICE_STATE_REASON_GSM_SIM_PIN_REQUIRED | GSM Modem's SIM Pin required |
NM_DEVICE_STATE_REASON_GSM_SIM_PUK_REQUIRED | GSM Modem's SIM Puk required |
NM_DEVICE_STATE_REASON_GSM_SIM_WRONG | GSM Modem's SIM wrong |
NM_DEVICE_STATE_REASON_INFINIBAND_MODE | InfiniBand device does not support connected mode |
NM_DEVICE_STATE_REASON_DEPENDENCY_FAILED | A dependency of the connection failed |
NM_DEVICE_STATE_REASON_BR2684_FAILED | Problem with the RFC 2684 Ethernet over ADSL bridge |
NM_DEVICE_STATE_REASON_MODEM_MANAGER_UNAVAILABLE | ModemManager not running |
NM_DEVICE_STATE_REASON_SSID_NOT_FOUND | The Wi-Fi network could not be found |
NM_DEVICE_STATE_REASON_SECONDARY_CONNECTION_FAILED | A secondary connection of the base connection failed |
NM_DEVICE_STATE_REASON_DCB_FCOE_FAILED | DCB or FCoE setup failed |
NM_DEVICE_STATE_REASON_TEAMD_CONTROL_FAILED | teamd control failed |
NM_DEVICE_STATE_REASON_MODEM_FAILED | Modem failed or no longer available |
NM_DEVICE_STATE_REASON_MODEM_AVAILABLE | Modem now ready and available |
NM_DEVICE_STATE_REASON_SIM_PIN_INCORRECT | SIM PIN was incorrect |
NM_DEVICE_STATE_REASON_NEW_ACTIVATION | New connection activation was enqueued |
NM_DEVICE_STATE_REASON_PARENT_CHANGED | the device's parent changed |
NM_DEVICE_STATE_REASON_PARENT_MANAGED_CHANGED | the device parent's management changed |
NM_DEVICE_STATE_REASON_OVSDB_FAILED | problem communicating with Open vSwitch database |
NM_DEVICE_STATE_REASON_IP_ADDRESS_DUPLICATE | a duplicate IP address was detected |
NM_DEVICE_STATE_REASON_IP_METHOD_UNSUPPORTED | The selected IP method is not supported |
NM_DEVICE_STATE_REASON_SRIOV_CONFIGURATION_FAILED | configuration of SR-IOV parameters failed |
NM_DEVICE_STATE_REASON_PEER_NOT_FOUND | The Wi-Fi P2P peer could not be found |
NM_DEVICE_STATE_REASON_DEVICE_HANDLER_FAILED | The device handler dispatcher returned an error. Since: 1.46 |

### enum NMMetered

The NMMetered enum has two different purposes: one is to configure "connection.metered" setting of a connection profile in NMSettingConnection, and the other is to express the actual metered state of the NMDevice at a given moment.

For the connection profile only NM_METERED_UNKNOWN, NM_METERED_NO and NM_METERED_YES are allowed.

The device's metered state at runtime is determined by the profile which is currently active. If the profile explicitly specifies NM_METERED_NO or NM_METERED_YES, then the device's metered state is as such. If the connection profile leaves it undecided at NM_METERED_UNKNOWN (the default), then NetworkManager tries to guess the metered state, for example based on the device type or on DHCP options (like Android devices exposing a "ANDROID_METERED" DHCP vendor option). This then leads to either NM_METERED_GUESS_NO or NM_METERED_GUESS_YES.

Most applications probably should treat the runtime state NM_METERED_GUESS_YES like NM_METERED_YES, and all other states as not metered.

Note that the per-device metered states are then combined to a global metered state. This is basically the metered state of the device with the best default route. However, that generalization of a global metered state may not be correct if the default routes for IPv4 and IPv6 are on different devices, or if policy routing is configured. In general, the global metered state tries to express whether the traffic is likely metered, but since that depends on the traffic itself, there is not one answer in all cases. Hence, an application may want to consider the per-device's metered states.

#### Members

NM_METERED_UNKNOWN | The metered status is unknown |
NM_METERED_YES | Metered, the value was explicitly configured |
NM_METERED_NO | Not metered, the value was explicitly configured |
NM_METERED_GUESS_YES | Metered, the value was guessed |
NM_METERED_GUESS_NO | Not metered, the value was guessed |

Since: 1.2

### enum NMConnectionMultiConnect

#### Members

NM_CONNECTION_MULTI_CONNECT_DEFAULT | indicates that the per-connection setting is unspecified. In this case, it will fallback to the default value, which is `NM_CONNECTION_MULTI_CONNECT_SINGLE`. |
NM_CONNECTION_MULTI_CONNECT_SINGLE | the connection profile can only be active once at each moment. Activating a profile that is already active, will first deactivate it. |
NM_CONNECTION_MULTI_CONNECT_MANUAL_MULTIPLE | the profile can be manually activated multiple times on different devices. However, regarding autoconnect, the profile will autoconnect only if it is currently not connected otherwise. |
NM_CONNECTION_MULTI_CONNECT_MULTIPLE | the profile can autoactivate and be manually activated multiple times together. |

Since: 1.14

### enum NMActiveConnectionState

NMActiveConnectionState values indicate the state of a connection to a specific network while it is starting, connected, or disconnecting from that network.

#### Members

NM_ACTIVE_CONNECTION_STATE_UNKNOWN | the state of the connection is unknown |
NM_ACTIVE_CONNECTION_STATE_ACTIVATING | a network connection is being prepared |
NM_ACTIVE_CONNECTION_STATE_ACTIVATED | there is a connection to the network |
NM_ACTIVE_CONNECTION_STATE_DEACTIVATING | the network connection is being torn down and cleaned up |
NM_ACTIVE_CONNECTION_STATE_DEACTIVATED | the network connection is disconnected and will be removed |

### enum NMActiveConnectionStateReason

Active connection state reasons.

#### Members

NM_ACTIVE_CONNECTION_STATE_REASON_UNKNOWN | The reason for the active connection state change is unknown. |
NM_ACTIVE_CONNECTION_STATE_REASON_NONE | No reason was given for the active connection state change. |
NM_ACTIVE_CONNECTION_STATE_REASON_USER_DISCONNECTED | The active connection changed state because the user disconnected it. |
NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_DISCONNECTED | The active connection changed state because the device it was using was disconnected. |
NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_STOPPED | The service providing the VPN connection was stopped. |
NM_ACTIVE_CONNECTION_STATE_REASON_IP_CONFIG_INVALID | The IP config of the active connection was invalid. |
NM_ACTIVE_CONNECTION_STATE_REASON_CONNECT_TIMEOUT | The connection attempt to the VPN service timed out. |
NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_TIMEOUT | A timeout occurred while starting the service providing the VPN connection. |
NM_ACTIVE_CONNECTION_STATE_REASON_SERVICE_START_FAILED | Starting the service providing the VPN connection failed. |
NM_ACTIVE_CONNECTION_STATE_REASON_NO_SECRETS | Necessary secrets for the connection were not provided. |
NM_ACTIVE_CONNECTION_STATE_REASON_LOGIN_FAILED | Authentication to the server failed. |
NM_ACTIVE_CONNECTION_STATE_REASON_CONNECTION_REMOVED | The connection was deleted from settings. |
NM_ACTIVE_CONNECTION_STATE_REASON_DEPENDENCY_FAILED | Master connection of this connection failed to activate. |
NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REALIZE_FAILED | Could not create the software device link. |
NM_ACTIVE_CONNECTION_STATE_REASON_DEVICE_REMOVED | The device this connection depended on disappeared. |

Since: 1.8

### enum NMSecretAgentGetSecretsFlags

NMSecretAgentGetSecretsFlags values modify the behavior of a GetSecrets request.

#### Members

NM_SECRET_AGENT_GET_SECRETS_FLAG_NONE | no special behavior; by default no user interaction is allowed and requests for secrets are fulfilled from persistent storage, or if no secrets are available an error is returned. |
NM_SECRET_AGENT_GET_SECRETS_FLAG_ALLOW_INTERACTION | allows the request to interact with the user, possibly prompting via UI for secrets if any are required, or if none are found in persistent storage. |
NM_SECRET_AGENT_GET_SECRETS_FLAG_REQUEST_NEW | explicitly prompt for new secrets from the user. This flag signals that NetworkManager thinks any existing secrets are invalid or wrong. This flag implies that interaction is allowed. |
NM_SECRET_AGENT_GET_SECRETS_FLAG_USER_REQUESTED | set if the request was initiated by user-requested action via the D-Bus interface, as opposed to automatically initiated by NetworkManager in response to (for example) scan results or carrier changes. |
NM_SECRET_AGENT_GET_SECRETS_FLAG_WPS_PBC_ACTIVE | indicates that WPS enrollment is active with PBC method. The agent may suggest that the user pushes a button on the router instead of supplying a PSK. |
NM_SECRET_AGENT_GET_SECRETS_FLAG_ONLY_SYSTEM | Internal flag, not part of the D-Bus API. |
NM_SECRET_AGENT_GET_SECRETS_FLAG_NO_ERRORS | Internal flag, not part of the D-Bus API. |

### enum NMSecretAgentCapabilities

NMSecretAgentCapabilities indicate various capabilities of the agent.

#### Members

NM_SECRET_AGENT_CAPABILITY_NONE | the agent supports no special capabilities |
NM_SECRET_AGENT_CAPABILITY_VPN_HINTS | the agent supports passing hints to VPN plugin authentication dialogs. |
NM_SECRET_AGENT_CAPABILITY_LAST | bounds checking value; should not be used. |

### NM_LLDP_ATTR_RAW

    #define NM_LLDP_ATTR_RAW                  "raw"

### NM_LLDP_ATTR_DESTINATION

    #define NM_LLDP_ATTR_DESTINATION          "destination"

### NM_LLDP_ATTR_CHASSIS_ID_TYPE

    #define NM_LLDP_ATTR_CHASSIS_ID_TYPE      "chassis-id-type"

### NM_LLDP_ATTR_CHASSIS_ID

    #define NM_LLDP_ATTR_CHASSIS_ID           "chassis-id"

### NM_LLDP_ATTR_PORT_ID_TYPE

    #define NM_LLDP_ATTR_PORT_ID_TYPE         "port-id-type"

### NM_LLDP_ATTR_PORT_ID

    #define NM_LLDP_ATTR_PORT_ID              "port-id"

### NM_LLDP_ATTR_PORT_DESCRIPTION

    #define NM_LLDP_ATTR_PORT_DESCRIPTION     "port-description"

### NM_LLDP_ATTR_SYSTEM_NAME

    #define NM_LLDP_ATTR_SYSTEM_NAME          "system-name"

### NM_LLDP_ATTR_SYSTEM_DESCRIPTION

    #define NM_LLDP_ATTR_SYSTEM_DESCRIPTION   "system-description"

### NM_LLDP_ATTR_SYSTEM_CAPABILITIES

    #define NM_LLDP_ATTR_SYSTEM_CAPABILITIES  "system-capabilities"

### NM_LLDP_ATTR_MANAGEMENT_ADDRESSES

    #define NM_LLDP_ATTR_MANAGEMENT_ADDRESSES "management-addresses"

### NM_LLDP_ATTR_IEEE_802_1_PVID

    #define NM_LLDP_ATTR_IEEE_802_1_PVID   "ieee-802-1-pvid"

### NM_LLDP_ATTR_IEEE_802_1_VLANS

    #define NM_LLDP_ATTR_IEEE_802_1_VLANS  "ieee-802-1-vlans"

### NM_LLDP_ATTR_IEEE_802_1_PPVIDS

    #define NM_LLDP_ATTR_IEEE_802_1_PPVIDS "ieee-802-1-ppvids"

### NM_LLDP_ATTR_IEEE_802_3_MAC_PHY_CONF

    #define NM_LLDP_ATTR_IEEE_802_3_MAC_PHY_CONF   "ieee-802-3-mac-phy-conf"

### NM_LLDP_ATTR_IEEE_802_3_POWER_VIA_MDI

    #define NM_LLDP_ATTR_IEEE_802_3_POWER_VIA_MDI  "ieee-802-3-power-via-mdi"

### NM_LLDP_ATTR_IEEE_802_3_MAX_FRAME_SIZE

    #define NM_LLDP_ATTR_IEEE_802_3_MAX_FRAME_SIZE "ieee-802-3-max-frame-size"

### NM_LLDP_ATTR_MUD_URL

    #define NM_LLDP_ATTR_MUD_URL "mud-url"

### NM_LLDP_ATTR_IEEE_802_1_VID

    #define NM_LLDP_ATTR_IEEE_802_1_VID       "ieee-802-1-vid"

### NM_LLDP_ATTR_IEEE_802_1_VLAN_NAME

    #define NM_LLDP_ATTR_IEEE_802_1_VLAN_NAME "ieee-802-1-vlan-name"

### NM_LLDP_ATTR_IEEE_802_1_PPVID

    #define NM_LLDP_ATTR_IEEE_802_1_PPVID       "ieee-802-1-ppvid"

### NM_LLDP_ATTR_IEEE_802_1_PPVID_FLAGS

    #define NM_LLDP_ATTR_IEEE_802_1_PPVID_FLAGS "ieee-802-1-ppvid-flags"

### NM_LLDP_DEST_NEAREST_BRIDGE

    #define NM_LLDP_DEST_NEAREST_BRIDGE          "nearest-bridge"

### NM_LLDP_DEST_NEAREST_NON_TPMR_BRIDGE

    #define NM_LLDP_DEST_NEAREST_NON_TPMR_BRIDGE "nearest-non-tpmr-bridge"

### NM_LLDP_DEST_NEAREST_CUSTOMER_BRIDGE

    #define NM_LLDP_DEST_NEAREST_CUSTOMER_BRIDGE "nearest-customer-bridge"

### enum NMIPTunnelMode

The tunneling mode.

#### Members

NM_IP_TUNNEL_MODE_UNKNOWN | Unknown/unset tunnel mode |
NM_IP_TUNNEL_MODE_IPIP | IP in IP tunnel |
NM_IP_TUNNEL_MODE_GRE | GRE tunnel |
NM_IP_TUNNEL_MODE_SIT | SIT tunnel |
NM_IP_TUNNEL_MODE_ISATAP | ISATAP tunnel |
NM_IP_TUNNEL_MODE_VTI | VTI tunnel |
NM_IP_TUNNEL_MODE_IP6IP6 | IPv6 in IPv6 tunnel |
NM_IP_TUNNEL_MODE_IPIP6 | IPv4 in IPv6 tunnel |
NM_IP_TUNNEL_MODE_IP6GRE | IPv6 GRE tunnel |
NM_IP_TUNNEL_MODE_VTI6 | IPv6 VTI tunnel |
NM_IP_TUNNEL_MODE_GRETAP | GRETAP tunnel |
NM_IP_TUNNEL_MODE_IP6GRETAP | IPv6 GRETAP tunnel |

Since: 1.2

### enum NMCheckpointCreateFlags

The flags for CheckpointCreate call

#### Members

NM_CHECKPOINT_CREATE_FLAG_NONE | no flags |
NM_CHECKPOINT_CREATE_FLAG_DESTROY_ALL | when creating a new checkpoint, destroy all existing ones. |
NM_CHECKPOINT_CREATE_FLAG_DELETE_NEW_CONNECTIONS | upon rollback, delete any new connection added after the checkpoint. Since: 1.6. |
NM_CHECKPOINT_CREATE_FLAG_DISCONNECT_NEW_DEVICES | upon rollback, disconnect any new device appeared after the checkpoint. Since: 1.6. |

NM_CHECKPOINT_CREATE_FLAG_ALLOW_OVERLAPPING

by default, creating a checkpoint fails if there are already existing checkpoints that reference the same devices. With this flag, creation of such checkpoints is allowed, however, if an older checkpoint that references overlapping devices gets rolled back, it will automatically destroy this checkpoint during rollback. This allows to create several overlapping checkpoints in parallel, and rollback to them at will. With the special case that rolling back to an older checkpoint will invalidate all overlapping younger checkpoints. This opts-in that the checkpoint can be automatically destroyed by the rollback of an older checkpoint. Since: 1.12.

NM_CHECKPOINT_CREATE_FLAG_NO_PRESERVE_EXTERNAL_PORTS | during rollback, by default externally added ports attached to bridge devices are preserved. With this flag, the rollback detaches all external ports. This only has an effect for bridge ports. Before 1.38, this was the default behavior. Since: 1.38. |

Since: 1.12: Public since 1.4, g-ir since 1.12.

### enum NMRollbackResult

The result of a checkpoint `Rollback()` operation for a specific device.

#### Members

NM_ROLLBACK_RESULT_OK | the rollback succeeded. |
NM_ROLLBACK_RESULT_ERR_NO_DEVICE | the device no longer exists. |
NM_ROLLBACK_RESULT_ERR_DEVICE_UNMANAGED | the device is now unmanaged. |
NM_ROLLBACK_RESULT_ERR_FAILED | other errors during rollback. |

Since: 1.4

### enum NMSettingsConnectionFlags

Flags describing the current activation state.

#### Members

NM_SETTINGS_CONNECTION_FLAG_NONE | an alias for numeric zero, no flags set. |
NM_SETTINGS_CONNECTION_FLAG_UNSAVED | the connection is not saved to disk. That either means, that the connection is in-memory only and currently is not backed by a file. Or, that the connection is backed by a file, but has modifications in-memory that were not persisted to disk. |
NM_SETTINGS_CONNECTION_FLAG_NM_GENERATED | A connection is "nm-generated" if it was generated by NetworkManger. If the connection gets modified or saved by the user, the flag gets cleared. A nm-generated is also unsaved and has no backing file as it is in-memory only. |
NM_SETTINGS_CONNECTION_FLAG_VOLATILE | The connection will be deleted when it disconnects. That is for in-memory connections (unsaved), which are currently active but deleted on disconnect. Volatile connections are always unsaved, but they are also no backing file on disk and are entirely in-memory only. |
NM_SETTINGS_CONNECTION_FLAG_EXTERNAL | the profile was generated to represent an external configuration of a networking device. Since: 1.26. |

Since: 1.12

### enum NMActivationStateFlags

Flags describing the current activation state.

#### Members

NM_ACTIVATION_STATE_FLAG_NONE | an alias for numeric zero, no flags set. |
NM_ACTIVATION_STATE_FLAG_IS_MASTER | the device is a master. |
NM_ACTIVATION_STATE_FLAG_IS_SLAVE | the device is a slave. |
NM_ACTIVATION_STATE_FLAG_LAYER2_READY | layer2 is activated and ready. |
NM_ACTIVATION_STATE_FLAG_IP4_READY | IPv4 setting is completed. |
NM_ACTIVATION_STATE_FLAG_IP6_READY | IPv6 setting is completed. |
NM_ACTIVATION_STATE_FLAG_MASTER_HAS_SLAVES | The master has any slave devices attached. This only makes sense if the device is a master. |
NM_ACTIVATION_STATE_FLAG_LIFETIME_BOUND_TO_PROFILE_VISIBILITY | the lifetime of the activation is bound to the visibility of the connection profile, which in turn depends on "connection.permissions" and whether a session for the user exists. Since: 1.16. |
NM_ACTIVATION_STATE_FLAG_EXTERNAL | the active connection was generated to represent an external configuration of a networking device. Since: 1.26. |

Since: 1.10

### enum NMSettingsAddConnection2Flags

Numeric flags for the "flags" argument of `AddConnection2()` D-Bus API.

#### Members

NM_SETTINGS_ADD_CONNECTION2_FLAG_NONE | an alias for numeric zero, no flags set. |
NM_SETTINGS_ADD_CONNECTION2_FLAG_TO_DISK | to persist the connection to disk. |
NM_SETTINGS_ADD_CONNECTION2_FLAG_IN_MEMORY | to make the connection in-memory only. |
NM_SETTINGS_ADD_CONNECTION2_FLAG_BLOCK_AUTOCONNECT | usually, when the connection has autoconnect enabled and gets added, it becomes eligible to autoconnect right away. Setting this flag, disables autoconnect until the connection is manually activated. |

Since: 1.20

### enum NMSettingsUpdate2Flags

#### Members

NM_SETTINGS_UPDATE2_FLAG_NONE | an alias for numeric zero, no flags set. |
NM_SETTINGS_UPDATE2_FLAG_TO_DISK | to persist the connection to disk. |

NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY

makes the profile in-memory. Note that such profiles are stored in keyfile format under /run. If the file is already in-memory, the file in /run is updated in-place. Otherwise, the previous storage for the profile is left unchanged on disk, and the in-memory copy shadows it. Note that the original filename of the previous persistent storage (if any) is remembered. That means, when later persisting the profile again to disk, the file on disk will be overwritten again. Likewise, when finally deleting the profile, both the storage from /run and persistent storage are deleted (or if the persistent storage does not allow deletion, and nmmeta file is written to mark the UUID as deleted).

NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED

this is almost the same as `NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY`, with one difference: when later deleting the profile, the original profile will not be deleted. Instead a nmmeta file is written to /run to indicate that the profile is gone. Note that if such a nmmeta tombstone file exists and hides a file in persistent storage, then when re-adding the profile with the same UUID, then the original storage is taken over again.

NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY | this is like `NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY`, but if the connection has a corresponding file on persistent storage, the file will be deleted right away. If the profile is later again persisted to disk, a new, unused filename will be chosen. |

NM_SETTINGS_UPDATE2_FLAG_VOLATILE

This can be specified with either `NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY`, `NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_DETACHED` or `NM_SETTINGS_UPDATE2_FLAG_IN_MEMORY_ONLY`. After making the connection in-memory only, the connection is marked as volatile. That means, if the connection is currently not active it will be deleted right away. Otherwise, it is marked to for deletion once the connection deactivates. A volatile connection cannot autoactivate again (because it's about to be deleted), but a manual activation will clear the volatile flag.

NM_SETTINGS_UPDATE2_FLAG_BLOCK_AUTOCONNECT | usually, when the connection has autoconnect enabled and is modified, it becomes eligible to autoconnect right away. Setting this flag, disables autoconnect until the connection is manually activated. |

NM_SETTINGS_UPDATE2_FLAG_NO_REAPPLY

when a profile gets modified that is currently active, then these changes don't take effect for the active device unless the profile gets reactivated or the configuration reapplied. There are two exceptions: by default "connection.zone" and "connection.metered" properties take effect immediately. Specify this flag to prevent these properties to take effect, so that the change is restricted to modify the profile. Since: 1.20.

Since: 1.12

### enum NMDeviceReapplyFlags

Flags for the `Reapply()` D-Bus call of a device and `nm_device_reapply_async()`.

#### Members

NM_DEVICE_REAPPLY_FLAGS_NONE | no flag set. |
NM_DEVICE_REAPPLY_FLAGS_PRESERVE_EXTERNAL_IP | during reapply, preserve external IP addresses and routes. |

Since: 1.42

### enum NMTernary

An boolean value that can be overridden by a default.

#### Members

NM_TERNARY_DEFAULT | use the globally-configured default value. |
NM_TERNARY_FALSE | the option is disabled. |
NM_TERNARY_TRUE | the option is enabled. |

Since: 1.14

### enum NMManagerReloadFlags

Flags for the manager `Reload()` call.

#### Members

NM_MANAGER_RELOAD_FLAG_NONE | an alias for numeric zero, no flags set. This reloads everything that is supported and is identical to a SIGHUP. |
NM_MANAGER_RELOAD_FLAG_CONF | reload the NetworkManager.conf configuration from disk. Note that this does not include connections, which can be reloaded via Setting's `ReloadConnections()`. |
NM_MANAGER_RELOAD_FLAG_DNS_RC | update DNS configuration, which usually involves writing /etc/resolv.conf anew. |
NM_MANAGER_RELOAD_FLAG_DNS_FULL | means to restart the DNS plugin. This is for example useful when using dnsmasq plugin, which uses additional configuration in /etc/NetworkManager/dnsmasq.d. If you edit those files, you can restart the DNS plugin. This action shortly interrupts name resolution. |
NM_MANAGER_RELOAD_FLAG_ALL | all flags. |

Since: 1.22

### enum NMDeviceInterfaceFlags

Flags for a network interface.

#### Members

NM_DEVICE_INTERFACE_FLAG_NONE | an alias for numeric zero, no flags set. |
NM_DEVICE_INTERFACE_FLAG_UP | the interface is enabled from the administrative point of view. Corresponds to kernel IFF_UP. |
NM_DEVICE_INTERFACE_FLAG_LOWER_UP | the physical link is up. Corresponds to kernel IFF_LOWER_UP. |
NM_DEVICE_INTERFACE_FLAG_PROMISC | receive all packets. Corresponds to kernel IFF_PROMISC. Since: 1.32. |
NM_DEVICE_INTERFACE_FLAG_CARRIER | the interface has carrier. In most cases this is equal to the value of `NM_DEVICE_INTERFACE_FLAG_LOWER_UP` . However some devices have a non-standard carrier detection mechanism. |
NM_DEVICE_INTERFACE_FLAG_LLDP_CLIENT_ENABLED | the flag to indicate device LLDP status. Since: 1.32. |

Since: 1.22

### enum NMClientPermission

NMClientPermission values indicate various permissions that NetworkManager clients can obtain to perform certain tasks on behalf of the current user.

#### Members

NM_CLIENT_PERMISSION_NONE | unknown or no permission |
NM_CLIENT_PERMISSION_ENABLE_DISABLE_NETWORK | controls whether networking can be globally enabled or disabled |
NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIFI | controls whether Wi-Fi can be globally enabled or disabled |
NM_CLIENT_PERMISSION_ENABLE_DISABLE_WWAN | controls whether WWAN (3G) can be globally enabled or disabled |
NM_CLIENT_PERMISSION_ENABLE_DISABLE_WIMAX | controls whether WiMAX can be globally enabled or disabled |
NM_CLIENT_PERMISSION_SLEEP_WAKE | controls whether the client can ask NetworkManager to sleep and wake |
NM_CLIENT_PERMISSION_NETWORK_CONTROL | controls whether networking connections can be started, stopped, and changed |
NM_CLIENT_PERMISSION_WIFI_SHARE_PROTECTED | controls whether a password protected Wi-Fi hotspot can be created |
NM_CLIENT_PERMISSION_WIFI_SHARE_OPEN | controls whether an open Wi-Fi hotspot can be created |
NM_CLIENT_PERMISSION_SETTINGS_MODIFY_SYSTEM | controls whether connections that are available to all users can be modified |
NM_CLIENT_PERMISSION_SETTINGS_MODIFY_OWN | controls whether connections owned by the current user can be modified |
NM_CLIENT_PERMISSION_SETTINGS_MODIFY_HOSTNAME | controls whether the persistent hostname can be changed |
NM_CLIENT_PERMISSION_SETTINGS_MODIFY_GLOBAL_DNS | modify persistent global DNS configuration |
NM_CLIENT_PERMISSION_RELOAD | controls access to Reload. |
NM_CLIENT_PERMISSION_CHECKPOINT_ROLLBACK | permission to create checkpoints. |
NM_CLIENT_PERMISSION_ENABLE_DISABLE_STATISTICS | controls whether device statistics can be globally enabled or disabled |
NM_CLIENT_PERMISSION_ENABLE_DISABLE_CONNECTIVITY_CHECK | controls whether connectivity check can be enabled or disabled |
NM_CLIENT_PERMISSION_WIFI_SCAN | controls whether wifi scans can be performed |
NM_CLIENT_PERMISSION_LAST | a reserved boundary value |

### enum NMClientPermissionResult

NMClientPermissionResult values indicate what authorizations and permissions the user requires to obtain a given NMClientPermission

#### Members

NM_CLIENT_PERMISSION_RESULT_UNKNOWN | unknown or no authorization |
NM_CLIENT_PERMISSION_RESULT_YES | the permission is available |
NM_CLIENT_PERMISSION_RESULT_AUTH | authorization is necessary before the permission is available |
NM_CLIENT_PERMISSION_RESULT_NO | permission to perform the operation is denied by system policy |

### enum NMRadioFlags

Flags related to radio interfaces.

#### Members

NM_RADIO_FLAG_NONE | an alias for numeric zero, no flags set. |
NM_RADIO_FLAG_WLAN_AVAILABLE | A Wireless LAN device or rfkill switch is detected in the system. |
NM_RADIO_FLAG_WWAN_AVAILABLE | A Wireless WAN device or rfkill switch is detected in the system. |

Since: 1.38

### enum NMMptcpFlags

#### Members

NM_MPTCP_FLAGS_NONE | The default, meaning that no MPTCP flags are set. |
NM_MPTCP_FLAGS_DISABLED | don't configure MPTCP endpoints on the device. |

NM_MPTCP_FLAGS_ENABLED

MPTCP is enabled and endpoints will be configured. This flag is implied if any of the other flags indicate that MPTCP is enabled and therefore in most cases unnecessary. Note that if "/proc/sys/net/mptcp/enabled" sysctl is disabled, MPTCP handling is disabled despite this flag. This can be overruled with the "also-without-sysctl" flag. Note that by default interfaces that don't have a default route are excluded from having MPTCP endpoints configured. This can be overruled with the "also-without-default-route" and this affects endpoints per address family.

NM_MPTCP_FLAGS_ALSO_WITHOUT_SYSCTL | even if MPTCP handling is enabled via the "enabled" flag, it is ignored unless "/proc/sys/net/mptcp/enabled" is on. With this flag, MPTCP endpoints will be configured regardless of the sysctl setting. |
NM_MPTCP_FLAGS_ALSO_WITHOUT_DEFAULT_ROUTE | even if MPTCP handling is enabled via the "enabled" flag, it is ignored per-address family unless NetworkManager configures a default route. With this flag, NetworkManager will also configure MPTCP endpoints if there is no default route. This takes effect per-address family. |
NM_MPTCP_FLAGS_SIGNAL | Flag for the MPTCP endpoint. The endpoint will be announced/signaled to each peer via an MPTCP ADD_ADDR sub-option. |
NM_MPTCP_FLAGS_SUBFLOW | Flag for the MPTCP endpoint. If additional subflow creation is allowed by the MPTCP limits, the MPTCP path manager will try to create an additional subflow using this endpoint as the source address after the MPTCP connection is established. |

NM_MPTCP_FLAGS_BACKUP

Flag for the MPTCP endpoint. If this is a subflow endpoint, the subflows created using this endpoint will have the backup flag set during the connection process. This flag instructs the peer to only send data on a given subflow when all non-backup subflows are unavailable. This does not affect outgoing data, where subflow priority is determined by the backup/non-backup flag received from the peer

NM_MPTCP_FLAGS_FULLMESH

Flag for the MPTCP endpoint. If this is a subflow endpoint and additional subflow creation is allowed by the MPTCP limits, the MPTCP path manager will try to create an additional subflow for each known peer address, using this endpoint as the source address. This will occur after the MPTCP connection is established. If the peer did not announce any additional addresses using the MPTCP ADD_ADDR sub-option, this will behave the same as a plain subflow endpoint. When the peer does announce addresses, each received ADD_ADDR sub-option will trigger creation of an additional subflow to generate a full mesh topology.

Since: 1.40

### NM_SECRET_TAG_VPN_MSG

    #define NM_SECRET_TAG_VPN_MSG "x-vpn-message:"

### NM_SECRET_TAG_DYNAMIC_CHALLENGE

    #define NM_SECRET_TAG_DYNAMIC_CHALLENGE      "x-dynamic-challenge:"

### NM_SECRET_TAG_DYNAMIC_CHALLENGE_ECHO

    #define NM_SECRET_TAG_DYNAMIC_CHALLENGE_ECHO "x-dynamic-challenge-echo:"